What's new in version 6101r1

What's new in version 6101r1

General

Clearing screen coordinates via menu

In addition to the existing shortcut to reset screen coordinates after modification, you can now also clear these coordinates directly from the top menu bar.
Since the shortcut was only available on the login screen, which is not shown to users with SSO, this menu option now provides a solution.

Calculations

New calculation method for leftover material in Large Format digital

In version 6101r1, a new calculation method has been added to Large Format digital: Optimize leftover material.

Key changes in version 6101r1

  1. This option is only available for plano.
  2. The checkbox for Optimize leftover material becomes visible only when the option With net is activated.
  3. In addition to the existing calculation options Without net and With net, there is now a third variant available: Optimize leftover material.
  4. This method determines the minimum block size against which the model is charged, based on the following logic:
    1. If the model width is less than or equal to half of the sheet width, it is rounded up to half a sheet width.
    2. If the model width is greater than half, it is rounded up to the full sheet width.
    3. The same logic applies for the height: less than or equal to half → half sheet height; greater than half → full sheet height.
    4. The final cost is calculated based on this “optimization block”.

Examples (material 1000 × 2050 mm, cost 10.00 EUR per sheet)

  1. Model 300 × 300 mm
    1. Without net: 10.00 EUR
    2. With net: 0.44 EUR
    3. Optimize leftover material: 2.50 EUR
  2. Model 520 × 300 mm
    1. Without net: 10.00 EUR
    2. With net: 0.76 EUR
    3. Optimize leftover material: 5.00 EUR
  3. Model 300 × 1020 mm
    1. Without net: 10.00 EUR
    2. With net: 1.49 EUR
    3. Optimize leftover material: 2.50 EUR
  4. Model 550 × 1050 mm
    1. Without net: 10.00 EUR
    2. With net: 2.82 EUR
    3. Optimize leftover material: 10.00 EUR

Rates

Extension of Transsmart for FedEx

We have extended the integration with an additional label Non-Docs:

  1. [
  2.    {
  3.        “reference”: “MP5190207”,
  4.        “service”: “NON-DOCS”,
  5.        “description”: “Banners”,
  6.         …..
  7.    }
  8. ]
This has been added to support the connection with FedEx ‘ETD’ (Electronic Trade Documents).

Jobs

Display the name of the linked PDF on the job ticket

There is a structure available on the job ticket that neatly shows the objects, versions, and (when assigned) also a thumbnail. This has now been extended so that the name (or names, if multiple PDFs are linked) of the PDF is also displayed.

Delivery notes

Calculation button for weight in partial deliveries

When creating a delivery note and choosing not to deliver the full quantity, a calculation button is now available to calculate the weight based on the entered quantity.
This button works in the same way as the one already available in the delivery address of an order.

Shipping planning

Order references also sent to Bumbal

Order references are now also transferred to Bumbal, making it easier for the end customer to identify which job it concerns.
Notes
These references are not visible in the Bumbal interface, but they can be used on documents and emails. (This applies to the “description” field in the Bumbal call)

Change in Transsmart for FedEx

As part of the integration with FedEx, we have added the service NON-DOCS at the main level of the connection.

Reminders

Include division information on reminders

Just like with invoices, you can now use an OB Get to include division information on reminders.
Example: account number: OB Get(vOBJECT_DATA;“bank_iban”;is text)

MultiPress Cloud

Cloud access with 2FA authentication

For users with an active cloud license, you can now enable the 2FA authentication setting. This means that each time, access must be confirmed through an authentication tool on your phone before proceeding.

    • Related Articles

    • What's new in version 6102r1

      General Payment in four instalments As of version 6.1.02r1, the way payment terms are configured has been completely redesigned. Previously, in the customer and supplier record, you could simply enter a number in the payment term field (for example ...

    • What's new in version 6.1.02r6

      General CO2 Emission Parameters at Company Division Level The CO2 emission parameters for print score calculations have been moved from global system settings to the Company Data level. This enhancement allows you to configure different CO2 emission ...

    • What's new in version 6.1.02r3

      Stock management EUDR proof Starting from version 6102r3, MultiPress offers EUDR compliance for our MultiPress customers. More details on the functionality and its practical use can be found here: From EUDR challenge to advantage with MultiPress ...

    • What's new in version 6.1.02r4

      Post-calculation Improved departmental allocation in total reports To guarantee precise financial analysis, the 'Totals Post-calculation' report has been refined. Operations related to Digital and Large Format printing are now strictly categorized ...

    • Masterclass New Release MultiPress training

      Dataline releases as many as 3 new versions a year. To quickly exploit all the new features after an upgrade, we organise Masterclass Upgrade training sessions. How it works: Annual plan based on insights: Our developments are based on feedback from ...